News !!! RPS Pragmafix Schematics & Analyzer 1st in THE WORLD

[SWAPAN_MISHRA]

Pragmafix 1st in THE WORLD
---------------------------------

the only Schematics Products that provide their own measurement tools and connected to our Software, have a feature PC multi meter and Fault Finder - Navigation to thousand mobile phone models, for all
Problem Category and continue upodate since 3 years ago till today, every day 1 new mobile phone models all problem category, all software you use is only Pragmafix, just like we say before, we are not just pdf
schematics, pdf layout, pdf picture with many color line that make you confuse and dizzy, we are not just bitmap and bitmap multilayer with best all function that we have, we are not just boradview for laptop and
pc mainboard, we are not just collection of laptop and pc mainboard schematics and layout pdf, we are not just have collection of datasheet component in pdf, we are not just have bunch of mentoring books that we
write it, we are not just giving mentoring video, we are not just goive circuit tracking and show in 7 multimeter dioda value on it, we are not just have file flash download cloud storage, yes we have all of that, but we
have somethi g very special, we have device, we have database for hardware measurement value, we have torubleshooting solution in intteractive ways, we navigate and communicate with our device !!

OK, first Lets we explore about our Cheapest Devices, RPS lite Measurement tools, yes its Super Cheap but its Power full, Please take attantion o this all Feature :

RPS lite works like an MULTI meter, RPS can be used for cold test / passive test - such as diode mode - dropdown voltage value test in the same time RPS will measuring resistance ohm ( digital multimeters not do this )
for hot / active test RPS can switching from our software button and it become a volt meter for measure any input and output voltage of various ldo / smps bucks, all of this is displayed on your PC, in our Pragmafix
Multimeter menu, we present it in Digital number just like DIgital and Gauge just like analog multimeter in the same time

RPS also has an ampere / current meter that displayed in digital, gauge and curve so you can see the squency also. The most PHENOMENAL things, 1st in the worlds !! RPS connected to Pragmafix fault finder, detailed
repair navigation thousands of cases for various brands of mobile phone and models and it updates daily on Pragmafix, The measurement results using RPS will be compared with the database of ideal values ( from our
measurement results on the normal mobile phone of this type ) in our database server real time, so if it show a broken line ( red ) it will guided by instructions and shown the circuit path, if there is a short ( yellow )
you will be guided and show a list of suspects. RPS is connected use micro USB cable, no need install USB driver, Retail price is very very cheap !!

This Pragmafix Devices actually make and Lounched on October 2021 in Indonesia, Now Introduced to the world and want to start Distribute outside Indonesia, Soon it will be avaliable in india and
china and other country as well, but we have another option named RPS international that we will explain in other Thread after this


Worldwide Distributor - Reseller from all Nation is welcome !! please feel free to contact me to whatsapp
https://forum-gsmdevelopers.com / https://forum-gsmdevelopers.com



For retail please ask your tool seller to contact me and we will talk, we hope it will be avaliable soon in your country

 

[SWAPAN_MISHRA]

1. RPS use Multimeter Feature inside Pragmafix
-------------------------------------------------------

Passive measurement Dioda and Resistance at the Same time you can combine with our bitmap, that have Dioda Value inside the bitmap as shown on the picture in the same time you can open our multimeter
window and measure your customer mainboard, you can open also our circuit tracking, our schematics, or whatever guidance that you need to measure

Active measurement Volt meter to test all input or output of LDO and SMPS inside mobile phone mainboard you can combine with our circuit tracking that will show you the location for voltage of ldo and smps from
power ic as shown on the picture, in the same time you can open our multimeter window and measure your customer mainboard, you can open also our bitmap, schematics, or whatever you need to measure

Power Supply analyzer Current or Ampere meter, in Digital, Gauge and Plotter / bar graph, so you can know the Current Consumction form mobile phone in every mili second, you can change also the time per div
and current per div, just like osciloscope but for current, you ofcourse you can open your camera, and capture it and save it to your database, you can know each model mainboard consumtion with a graph, its good
right ? we deploy this before any power supply product use this idea it, just like 10 years ago for this concept

You can use also for Charging Current consumtion monitoring, or booting use usb / vbus, its very fast to analyze what step of booting procedure that has been mall function, becouse we dont show the ampere ( Y )
only, pragmafix will show time in ( X ) when it happen for each mili second, you can also using bar graph feature to get more detail value

 

[SWAPAN_MISHRA]

2. RPS use Fault Finder Feature inside Pragmafix
-----------------------------------------------------------

We do research, do measurement to each pin, we show all patch and suspect for all problem category that you will faced frequently, again and again, and you feel bored, for example :

LCD DISPLAY
LCD BACKLIGHT LED
TOUCHSCREEN
REAR CAMERA
FRONT CAMERA
SIM CARD
SDCARD
FINGER PRINT
FACE ID
MICROPHONE
FLASHLIGHT LED
RECIEVER SPEAKER
LOUDSPEAKER
HEADSET
VOLUME, POWER KEYPAD
CHARGING
DATA INTERFACE
STORAGE EMMC / UFS / NAND
RF CELLULAR NETWORKS
WIFI
BLUETOOTH
GPS
NFC
PMU INPUT OUTPUT
CPU / BOOT VOLTAGE

We Already make Database for Thousand Models of Mobile phones avaliable on the Market Now, and continue everyday, for each modesl have different problem category depend on feature availability on that mobile
phones model, for pocophone M3 that we use for this post, we provide this problem category :

for example customer comes, give pocophone M3 that have Front camera problem, change the camera Module not works, so waht you usually do after dismantle the unit and got the main board int the front of you ?

1. Open the Schematics
2. Open the layout
3. Search to the Schematics where is the location of Front camera socket
4. Finding the location of Frone camera Socket on the Layout
5. Figure out where is the 1st pin, and matching it from Schematics
6. Search one by one each nett name that related with this problem
7. Measure use dioda mode from multi meter and write on the paper note each pin of camera socket measurement result value

you can see on the schematics that pin used for some nett name or NC or GND, but you still dont know anything about how much normal phone dioda value for each pin, you only predict it, after found the suspect you
need to open schematics again and find out the correct path of it, to next component and next component in schematics pdf, all of this will take at least 1 hour of your time, maybe more, if you still newbie maybe
more, after found broken circuit or shorting circuit of this 1st step ( circuit analyzing ) you still confuse what need to do.

HOW if Pragmafix with their Measurement device make it 5 minute, you dont need to check the schematics, all related nett name and circuit for that front camera problem, already in the list, and all pin we have
database ( in hidden table ) in our server to compare with your result from that mainboard, we already show you which pin for which nett name, properly, and based on original schematoics circuit and normal phone
you only need to follow the guide, will show where to put the probe and what it is and waiting for the value, and will compare it automatically with our server database, and will show normal (green) broken circuit (red)
or shorting circuit ( orange ) and complete the task for each pin, and just click the pin that have problem and follow the guide of line or suspect, just like this :

if you finish folowing the test, for all all pin is good ( green ) only one of pin have a broken line problem ( red ) like this VREG_L9A_1P8:

Just clik on that "problem" pin, and will show you proper line to check, to repair, just make that pin connected back to their line, and follow the instruction in red pop up window.

if you finish folowing the test, all pin is good ( green ) only one of pin have a shorting circuit problem ( orange ) like this VREG_L9A_1P8 :

Just clik on that "problem" pin, and will show you proper suspect list of component that have possibility make that pin connected / shorting to the ground, follow instruction on orange pop up
window to repair it.

it very easy right ? for all net name in that front camera for pocophone M3, for all other problem category for pocophone M3 its there also and for Thousand other Models for various brand, just like Apple iphone, ipad
asus, huawei, infinix, lenovo, lge, meizu, motorola, nokia, oneplus, oppo, realme, samsung, sony, tecno, vivo, xiaomi, etc.

.
..
...
..
.

what are you waiting for ? please go to our website http://pragmafix.net
or contact us in https://forum-gsmdevelopers.com